Installation Process of TSTC Ceramic Decorative Lines

Because of the features like light weight, solid structure, high strength, anti-crack etc., TSTC Ceramic Decorative Line  (also called ceramic decorative frieze ) is not difficult for installation or assemble, the installation process is also not complicated , you are welcome to check it as below .

1.Positioning. Set the line according to the installation position of the ceramic art line.

2.Adhesive Applying. Mix the tile adhesive with water,  then put it onto the back of the decorative art line.

3.Assemble The Art Line . Put the decorative art line with tile adhesive to the right position , with the help of the positioning lines from step 1, and press the decorative art line to the wall, make it against the wall firmly.  

4.Fastening. Stick the decorative art lines on the wall, punch holes on them with impact drill, and then fix them with the expansion screws. (If the dimension of the decorative art line smaller than 200x50mm, used the tile adhesive only .)

5.Adhesive filling. Fill the holes with tile adhesive.

6.Surface Treatment. Spray paint on the surface of the decorative art line, or paint with decoration materials after puttying .

TSTC is dedicated to provide the best ceramic products to our partners .